Be prepared to take the caliper and rotor off like a million times haha.

ISSUE RESOLVED. 1. My brake pads were touching the rotors. Compressed the brake pad pistons and now the rotor spins freely but still had some resistance. 2. Filed down the parking brake shoes since it was uneven all around and dragging hard in...

Could it be that maybe these are maybe the wrong parking brake shoes I got from oreilys? I have Evo 8 Brembos on with 2003 vented rotors for the rear.

Loosen up the tensioner..... It's the adjustment rod with a star wheel. It's the same system as drum brakes.

Hello, recently did drum to disc brake conversion. Replaced all hardware exactly how I took it off. Took off caliper and released cables tension and turned adjusting spring/nut to all the way loose. So I’m having an issue with the shoes or...

Forgot to update this thread after finishing😅Here’s a little diagram of pretty much most of how the OEM fuse box is wired. It’s fairly simple. Just label and crimp or solder and extend. Installed a 1/4 piece of ABS plastic to act as a spacer a...