Have I got some great news for you DSM owners. (Evo chassis HAVE BEEN CONFIRMED!!!)
As some of you know I have been working on the 2G rear brake kits. This is to work along side my fronts I currently offer and to match as a full setup " yes it was slow going and issues were found along the way which also caused some delays " BUT... IT IS NOW ALL DONE!
So this post will keep it brief ( full specs and details when the main post goes up ) The basic summary of the product(s) since it can come in 3 YES THREE variants.
OH don't I spoil you lot with too much choice haha
PAD SELECTION GUIDE HERE https://www.dsmtuners.com/threads/b...port-fm-pro-brake-pad-selection-guide.545801/
⚠ Option 1. £895 FM-PRO Rear 4 piston caliper which will use an off the shelf Evo 300mm Rotor, This is the most cost effective upgrade out of the 3 options and retains the OEM handbrake system and everything is bolt on ready.
⚠ Option 2. FM-PRO £915 Rear 4 piston caliper which will use the Evo X 330mm off the shelf rotor. (
notes ) The Evo X rotors Center bore will need to be machined out from 80mm to 90.05mm to fit the 2G hub, ALSO This removes the use of the OEM handbrake system! The option here is to use a hydraulic handbrake system safely plumbed into the rear calipers IF required. various options these days for hydraulic handbrakes inc locking ones that work as OEM would.
⚠ Option 3. FM-PRO £1750 4 piston caliper which will use a full custom alloy bell 2 piece rotor for maximum weight savings! up to 340mm for this kit. This setup can retain OEM handbrake functions or non brake shoe versions for more weight loss, Hydraulic handbrake as an option.
I can supply rotors if required, and pre machined if the Evo X option is chosen, also in a variety of finishes from J hook to race slotted I got you covered! please ask to discuss this
300mm pictures ( Red calipers ) see 330mm kit below red pictures ( black calipers )
#fibamotorsport #fibamotorsports #innovationstartshere #dsmtuners #dsmnation #dsmracecar
EVO IMAGES BELOW
330mm Evo X rotor pictures Below
As some of you know I have been working on the 2G rear brake kits. This is to work along side my fronts I currently offer and to match as a full setup " yes it was slow going and issues were found along the way which also caused some delays " BUT... IT IS NOW ALL DONE!
So this post will keep it brief ( full specs and details when the main post goes up ) The basic summary of the product(s) since it can come in 3 YES THREE variants.
OH don't I spoil you lot with too much choice haha
PAD SELECTION GUIDE HERE https://www.dsmtuners.com/threads/b...port-fm-pro-brake-pad-selection-guide.545801/
⚠ Option 1. £895 FM-PRO Rear 4 piston caliper which will use an off the shelf Evo 300mm Rotor, This is the most cost effective upgrade out of the 3 options and retains the OEM handbrake system and everything is bolt on ready.
⚠ Option 2. FM-PRO £915 Rear 4 piston caliper which will use the Evo X 330mm off the shelf rotor. (
notes ) The Evo X rotors Center bore will need to be machined out from 80mm to 90.05mm to fit the 2G hub, ALSO This removes the use of the OEM handbrake system! The option here is to use a hydraulic handbrake system safely plumbed into the rear calipers IF required. various options these days for hydraulic handbrakes inc locking ones that work as OEM would.⚠ Option 3. FM-PRO £1750 4 piston caliper which will use a full custom alloy bell 2 piece rotor for maximum weight savings! up to 340mm for this kit. This setup can retain OEM handbrake functions or non brake shoe versions for more weight loss, Hydraulic handbrake as an option.
I can supply rotors if required, and pre machined if the Evo X option is chosen, also in a variety of finishes from J hook to race slotted I got you covered! please ask to discuss this
300mm pictures ( Red calipers ) see 330mm kit below red pictures ( black calipers )
#fibamotorsport #fibamotorsports #innovationstartshere #dsmtuners #dsmnation #dsmracecar
EVO IMAGES BELOW
330mm Evo X rotor pictures Below
