I never installed my new flywheel, I installed the old one hoping it would be fine. When I had clutch disengagement issues I couldn't verify step height or condition of the old flywheel, so I just bought and installed a brand new one from Tim...
There is a company that sells the plugs with pigtails to adapt to the factory harness. For a 1g head unit it is $9.Metra 70-1743For the speakers plugs on a 1g and probably a 2g it is $6 per pair.Metra 72-9301 Speaker Connector for Select...
You hook up the + wire and that's it.Similar to people running multiple 255s back in the day, the higher amp alternator mod misses the mark. We need higher voltage, not higher amps. I ran a 160 amp alternator many years ago and juggled a few...
I personally would appreciate a nice new detailed write up on how to implement/install this. Or is it really so simple it doesn’t require one? Which output did you get?
Update time. Still waiting on the block to come back from the machine shop. Dropped it off in January. Getting frustrated. Wanted to have the motor in the car in April to feel comfortable with my time line of my first event being June 22-23. Been...
And that's small time, especially if you've seen avsforums alumni setups. I just have two so that I get a more even response across the width of the room; one is enough for output in there. Our old house had just one UXL18 (these are IXL18F +...
I'd be waiting in the car for the owner to come out just on the chance of striking up a conversation..That's some nice ass action thereMe, chopping some chairs down a few inches to fit comfortable under our new custom made black walnut...
booo hissssss
so many in this city, lots of RHD versions popping up now, all base models and wagons. the lengths people go for that "RHD", but swaps are possible down the road, I get it.
still, need to get me car back out there to break up some...
No wonder why so many people powder coat them.
I thought clear on aluminum would be like painting steel. I'll be the first to admit I should have done more research before I blasted clear engine enamel on it. Live and learn.
I'll re-strip it and...
I learned about it a while ago from a video. Surprised the hell out of me on what came to surface and the moisture in general. I hope it helps. I’ll be spraying this one but stopped because I watched that video.
Painting aluminum normally requires an etch primer to bite into so it holds. But to preserve your finish you cannot do that nor scuff up the surface. So you may want to look into a solvent type based paint or a 2k but have to be safe with 2k and...
You shouldn't put a washer behind pivot ball until you know you need one - otherwise the fork position may be off too far the other direction. Just after you bolt the tranny on, but before connecting anything else, check the fork position in the...