You might be able to peek inside the trans and check the TOB or clutch by pealing off the fork boot and shining some light in there, a small mirror might help too.
Since I am continuously struggling to make this any easier to read on this website, I've decided to upload a PDF file containing all the above information where anyone can download it and view it using Adobe Reader or other type of viewer...
So i was trying to get my car together for my birthday(today) and its all come down to a damn seal on the passenger front cv axle where it goes into the trans..🤦♂️ long story short i got the trans welded up just to find another broken ear on the...
Honestly if I was in a bind and if the car is not making a ton of power and it doesn't leak, I would just send it as is, the bolt below it goes all the way though that section into the bell housing. It's more likely to blow out out the bearing...
Well this is not a question i wanted to ask but here's some back story. I had to pull the trans to have a crack on the bellhousing welded and when i took it out i found another place where the trans case bolts together is broke off and im not...
I got it wired in, i found the wiring harness for the headunit and speakers, it was cut almost all the way back to the main harness and wrapped with elecrical tape lol, just need to get the speaker adapter mounts for the door and speaker cover...
There is a bypass test you can do that should help you figure this out.
Sometime when the starter is not working, do this test. You need a few feet of stiff electrical wire to do this.
Stiff would be like solid core wire of large gauge like 12...
Definetly im keeping track of evrrything amd takimg picutre of the thing i take apart incase i forget something since its going to be sitting until i find someone that can weld cast aluminum near me and i can afford it😂
So I paused on installing the radio for a while since I found another issue with the car but that's for another thread. Currently running wires for wires, the person that stripped the radio took the mounts out also. Does anyone have picture of...
broke the slave cylnder mounting ear amd cracked the bellhousing in the proccess so its goin on jack stands for a bit so it can get some love, i took the bumber off and found 2 out of 3 fmic mounts completely broke so ill be replacing that with a...
Do you happen to have one of those for a 1g, not sure thats gonna be the same for mine. Not that it would be much different any LOLNot sure if it did, i know it doesnt anymore though😂