Parting out 94 Eclipse 2.0 N/T automatic. Engine runs nice and quiet, can send a video. I will be keeping the seats. Big items will need to be local pickup near Nashville, IL. Let me know what you need.

TD05 and T3 flanges. Stainless and Mild steel. 13mm thick. Mild flanges are $20. Stainless $30. Or buy multiples. Currently have 4 SS TD05. Zero mild steel. 7 SS T3 and 9 T3 in mild steel. Ships in USPS flatrate padded mailer with tracking. Message 702-741-6987.

I've put 5 or 6 ads trying to sell parts separately that are earlier in the classifies Now I want to clean house, Everything for one price or offer Clean cylinder head Turbo assembly Intake assembly LSD Official manual 3 piece tail light assemble front and rear half shafts 4 aluminum Gen 1...

I hate to do this. But I got chance to by another galant that is local to me. That I have wanted to buy for the past 10 years or more. I don’t want it to slip away this time. Car has All new pads rotors and calipers all the way around. Has new master cylinder and non abs prop valve from JNZ...

Various flanges T3 turbine entry Stainless and 5 bolt exit, mild steel . 2.5 downpipe two bolt. Mild. 2g or Evo rear muffler flange mild TD05 entry are Stainless. Throttlebody. Oil flanges. Etc.

Talon had about 125,000 miles, regular oil changes, I do not think it was every milled

6 Bolt head, Standard valves, springs, retainers, seals. comes with cam caps and a fresh set of cam seals

Griffin intercooler cores. Top to bottom flow of course. Very low pressure drop and high cfm. The shorter is 6 tall 24 long and 3 thick. The taller core is 23.5 long. Manifold flange is 3.5. Core is 8 tall. Have 4 and 3 of each available. Treadstone makes some cast end tanks that...

Evo 3 inner axle cups. Got three sets like this from Japan a decade ago. Have a set now on a 1g diff with Evo 8 LSD built by TRE. Changed the tri pods on the stock axles. Did have a few sets of 2g non LSD cups. They didn’t fit well. These Evo 3 snap in and fit the LSD as any stock axle...

1g FWD fuel hanger with OEM line. Including OEM Phillips screws. Excellent condition. Ships in medium flatrate box. Message 702-741-6987.

Got this hood new in 1999. While it was fresh I reinforced the fiberglass webbing on the bottom. Neighbor restored corvettes for a living. Can’t remember the resin he gave me and material. He said it won’t crack or separate from flexing. In 01 I got a carbon hood which is still on the car...

Stock replacement pressure plate. Decades plus old. Believe it’s an Exedy stock oem spec PP. Fits 90-99.

Original RRE made rear strut brace or bar. Bolt in. Fairly lightweight also. Good for an autocross or race car. Definitely keep the rear from flexing.

JDM NT. One vac nipple. Another JDM appears to be 2g size.$50 Cable and tps on opposite sides. Message 702-741-6987

Stock 90-92 AWD six bolt flywheel. Good condition. Price is shipped in flatrate box. Message 702-741-6987

Had a few original dual runner intakes. Was impossible to get gaskets back then. Did bunch Dyno testing with the intake and opening rates. Had one apart to clean and port. Made gaskets. Found this today cleaning. The originals. Not the best. And another set identical to the set I made and...