The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support ExtremePSI

420A Visual Guide: 420A Motor and Transmission Mounts

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

420A Motor and Transmission Mounts


This guide is for the North American 1995-99 model year Mitsubishi Eclipse RS & GS COUPE (Not Spyder Convertible) and 1995-98 Eagle Talon (base) and ESi models equipped with a 420A Engine ONLY.

Note: All parts shown are New Old Stock (NOS). While I tried to source the example parts shown here from reputable sources, I cannot guarantee their authenticity.

Disclaimer: this info may not be comprehensive or exhaustive, and may contain mistakes or errors. If you see a mistake or something missing, feel free to drop a comment.






Front (Roll Stopper) Mount​

You must be logged in to view this image or video.


Front (Roll Stopper) Mount​

  • Auto Transmission: MB844275
  • Manual Transmission: MB844274

Center Hole Fasteners​

  • M10x75 Bolt: MF140473
  • M12 Flange Nut: MB288462

Mount Fasteners​

  • M10x30 Bolt (2 qty. required): MU242010


Left (Transmission) Mount​

You must be logged in to view this image or video.

Left (Transmission) Mount​

  • Auto Transmission: MB910661
  • Manual Transmission: MB910660

Stoppers​

  • Auto Transmission (2 qty. required): MR333457
  • Manual Transmission (2 qty. required): MB911549

Center Hole Fasteners​

  • M12x95 Bolt: MS100923
  • M12 Flange Nut: MF434106

Mount Fasteners​

  • M12 Self Locking Nut (3 qty. required): MB242260



Right Mount​

You must be logged in to view this image or video.


Right Mount: MB910657​

Stoppers (2 qty. required): MB911547​

Center Hole Fasteners​

  • M12x108 Bolt: MB844519
  • 12mm Spring Washer: MS450044

Mount Fasteners​

  • M12x74 Bolt: MB911545
  • 12mm Self Locking Nut (2 qty. required): MB242260



Rear (Roll Stopper) Mount​

You must be logged in to view this image or video.


Rear (Roll Stopper) Mount​

  • Auto Transmission: MB910663
  • Manual Transmission: MB910662

Center Hole Fasteners​

  • M10x90 Bolt: MB007173
  • 10mm Spring Washer: MS450043
  • M10 Nut: MF430122

Mount Fasteners​

  • M10x25 Bolt (3 qty. required): MB007176
 
Just a bit of additional info for those interested: The front roll stop mount center hole will fit a 16mm or 5/8" bolt. Since the bolt used is so small, there can be extra engine movement under 'spirited' driving. By taking out the bracket and matching the hole size with the mounts' and using a bigger bolt, there is minimized slop.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top